How to Install a Food Cutter Blade
Blade Installation and Adjustment
△ Basic Blade Installation Steps
First, we need to understand how to install the food cutter blade. During installation, ensure the blade is sharp and undamaged for smooth food cutting. Next, install the blade onto the cutter’s blade holder in the correct direction, ensuring a tight fit between the blade and the holder for efficient and safe cutting.
Furthermore, adjusting the slice thickness is also an important step when using a food cutter. By adjusting the distance between the blade and the slicing holder, we can easily control the slice thickness. During adjustment, careful observation and testing are necessary to achieve the desired slicing effect.
When installing the food cutter blade, we need to ensure it remains sharp and undamaged; this is crucial for smooth cutting. Next, fix the blade onto the cutter’s blade holder in a specific direction and carefully check that the blade and holder are tightly fitted to ensure efficient and safe cutting.
△ Blade Installation Steps
First, we need to remove the blade’s nut and washer. Next, position the blade in the correct orientation and carefully tighten the nut, but do not fully tighten it. Then, open the machine door and use a wrench to adjust the position of the internal eccentric wheel to fine-tune the blade holder. When the blade holder descends to its lowest point, it will automatically rise in the opposite direction until it reaches the set lowest position. Finally, press down on the blade to ensure it is tightly engaged with the blade holder, and then tighten the nut to ensure the blade is securely fixed to the blade holder.
△ Slice Thickness Adjustment Method
After installing the blade, we need to focus on an important step—adjusting the slice thickness. By properly adjusting the slice thickness, we can better control the cutting quality and efficiency.
△ Slice Thickness Adjustment Steps
After installing the blade and adjusting it to the appropriate position, we need to carefully adjust the slice thickness. Here are some simple steps to help you easily complete this operation:
- First, loosen the nuts on both sides to allow for subsequent adjustments.
- Next, adjust it to the desired slice thickness using the adjusting bolt. 1. Ensure the bolt adjustments on both sides are consistent to guarantee even food cutting.
- After adjusting the thickness, be sure to tighten the butterfly nut to secure the current setting.
By following these steps, you will be able to easily adjust the slice thickness for your desired cutting results.